provided features

Our Services

rcc-concrete-pipe-500x500

RCC Pipe

Reinforced concrete (RCC) Pipes are manufactured by centrifugal spinning process in which mechanical mixer concrete and reinforcement cage extended throughout the pipes barrel are used

hd-square-manhole-cover

Manhole Cover

A manhole cover or maintenance hole cover is a removable plate forming the lid over the opening of a manhole, an opening large enough for a person to pass through that is used as an access point for an underground vault or pipe

ready-mix-concrete-500x500

Ready Mix Concrete

Ready-mix concrete is concrete that is manufactured in a batch plant, according to each specific job requirement, then delivered to the job site "ready to use". There are two types with the first being the barrel truck or in–transit mixers. 

np2-pipes-500x500

RCC Pipe NP2

Spigot and socket ended pipes shall be used for water mains, sewer, irrigation and culverts/cross drains Flush jointed (NP3 and NP4) and collar JOinted (NP2) pipes shall be used for culverts/cross drains only

rcc-np3-class-pipe

RCC Pipe NP3

Non-Pressure RCC Hume pipes of class 2 are known as light-duty Hume pipes used for sewers, irrigation, and light traffic culverts. their thickness varies from 25 to 110 mm for 8cm dia and 2.2m dia respectively. for NP3 (medium duty) the thickness varies from 25 to 215mm. for 8cm dia and 2.6m dia respectively.

spigot-socket-pipe-500x500

Socket & Spigot

The end connection of a fitting that is to be assembled into another fitting is called the “Spigot.” The spigot end of a fitting has the same outside diameter as pipe. The common female connection of PVC fittings is referred to as the socket or hub, and the spigot end of a fitting can be inserted into a Hub or Socket.

hume brhc pipe

Hume Pipe

A hume pipe is a concrete tube with reinforced bar. It was invented by the Hume brothers in Australia in 1910. A hume pipe is formed by pouring concrete into a formwork, and axially rotating it, and allowing it to compact using centrifugal force.